Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
Adapters
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
Patch Cords & Pigtails
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
IDC Internal Connection
◇ MPO Patch Panels & Cassettes ◇ High Density MPO Patch Panel & Cassette ◇ MPO Trunk Cable ◇ MPO - LC Patch Cord ◇ MPO - LC Hardness ◇ Uniboot LC Patch Cord ◇ Pull - tap MPO ◇ Pull - tap LC Patch cord ◇ Polarity Switchable MPO Patch Cord ◇ Polarity Switchable LC Patch Cord ◇ CS/SN series
The VEC116R-PC-500W is an Ethernet over Coax (EoC) switch with 16 coax ports with Power over Coax (PoC) and 3*10/100/1000M Ethernet ports.
This switch provides connectivity up to 16 units of VEC11T-EC transmitter. Power is supplied to the transmitters through the coaxial cable. Varying data rates are supported depending on cable distance and quality.
This product also provides PoC management which allows the operator to remotely switch power on or off to any of the coax channels. Plug-and-play design ensures ease of installation with no electrical adjustment needed. LED indicators are provided to show the operational status of the unit clearly.
Application
The EoC products are used in pairs, with 1ch transmitter connecting to 1ch receiver, or 1ch transmitter(s) connecting to 8/16ch receiver. The following graph shows the connection of 1ch transmitter with 1ch receiver and 16ch receiver.
Application 1: 1ch EoC transmitter VEC11T-EC + 16ch EoC receiver VEC116R-PC. As shown on the left of the red dotted line, a maximum of 16 transmitters may be connected to the receiver.
Application 2: 1ch EoC transmitter VEC11T-EC + 1ch EoC receiver VEC11R-PC. As shown on the right of the red dotted line, this kind of connection is suited for more scattered applications.
Specifications
Item | Description | |
Power | Power Supply | 100-240VAC/5A 50-60HZ |
Consumption | <10W (without PoC), <500W (with PoC) | |
Coax Port | Transmission Medium | 75-5 or above coax cable |
Operating Frequency | 2M~28MHz | |
Modulation | Wavelet-OFDM | |
Power Negotiation Cycle | 1S | |
Overcurrent | 720mA | |
Overcurrent Protection Time | <2mS | |
Output Voltage | +48V | |
Transmission Rate | 210Mbps (Max.) | |
Ethernet Port | Transmission Medium | Cat5e/6 |
Standard | IEEE802.3, IEEE802.3U, IEEE802.3ab | |
Ethernet Delay | <1ms | |
Protection | ESD | IEC61000-4-2: 6KV (contact), 8KV (air) |
Anti-Thunder Protection | IEC61000-4-5: Coax port 4KV (CM), 2KV (DM) | |
Environment | Operating Temperature | -20℃~+50℃ |
Storage Temperature | -40℃~+85℃ | |
Humidity | 0~90% (non-condensing) | |
Mechanical | Dimensions | 44mm*280mm*440mm |
Material | Aluminum | |
Color | Black | |
Weight | 1.6Kg |
Dimensions (Unit = mm)
Panel Views and LED Indicators
Front Panel
Rear Panel
LED | Color | Status | Description |
PWR | Orange | On | Power supply is normal. |
IP-LINK | Green | On | 3*10/100/1000M Ethernet link is normal. |
C-LINK | Green | On | EoC connection is normal. |
I-MAX | Red | On | Total power of 4 channels more than 175W. |
PoC1~16 | Green | On | PoC is connected. |