Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
                                        Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
Adapters
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
Patch Cords & Pigtails
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
IDC Internal Connection
◇ MPO Patch Panels & Cassettes ◇ High Density MPO Patch Panel & Cassette ◇ MPO Trunk Cable ◇ MPO - LC Patch Cord ◇ MPO - LC Hardness ◇ Uniboot LC Patch Cord ◇ Pull - tap MPO ◇ Pull - tap LC Patch cord ◇ Polarity Switchable MPO Patch Cord ◇ Polarity Switchable LC Patch Cord ◇ CS/SN series
Features
· Used in indoor cabling,especial used in good laying condituons;
· Used in optical connections in optical communication equipment rooms and optical distribution frames,optical apparatus and equipments;
· Used as pigtails and patch cords;
· Used as access building cable.
Application
· Used in indoor cabling,especial used in good laying condituons;
· Used in optical connections in optical communication equipment rooms and optical distribution frames,optical apparatus and equipments;
· Used as pigtails and patch cords;
· Used as access building cable.
Options
· Fiber Type: G.652, G.655, G.657 single-mode fiber, A1a or A1b mulit-mode fiber, or other types of fiber;
· Fiber Count: The fiber count is usually 2,4,6,8 or 12 or other specified fiber count by clients.
· Jacket Material: Polyvinylchloride(PVC), Low smoke zero halogen(LSZH), Thermoplatic polyurethane(TPU), or other contracted material
· Jacket color: (including color of fiber)meets the requirements of relevant standards, or other contracted color
· Cable Dimension: The nominal cable dimension or other contracted dimension
· Delivery Length: 1KM or 2KM or other contracted length.
· Other Requirements: Other contracted special requests.
Specifications
| Fiber Cable Count | Dimensio n(mm)  | Cable Weight (kg/km)  | Tensile(N) | Crush(N/100mm) | Min.bend Radiu s(mm)  | Range of Long Temperature(°C)  | |||
| Long Term | Short Term | Long Term | Short Term | Dynamic | Static | ||||
Flat Optical-fiber Ribbon Indoor Cable  | |||||||||
4  | 2.2*3.5  | 7.4  | 80  | 200  | 200  | 500  | 50  | 30  | |
6  | 2.2*4.0  | 8.2  | 80  | 200  | 200  | 500  | 50  | 30  | -20°C ~ +60°C  | 
8  | 2.2*4.5  | 9.3  | 80  | 200  | 200  | 500  | 50  | 30  | |
12  | 2.2*5.0  | 10  | 80  | 200  | 200  | 500  | 50  | 30  | |
Note:1 The minimum bend radius(static)is 5D when G.657fiber is used