Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
Adapters
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
Patch Cords & Pigtails
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
IDC Internal Connection
◇ MPO Patch Panels & Cassettes ◇ High Density MPO Patch Panel & Cassette ◇ MPO Trunk Cable ◇ MPO - LC Patch Cord ◇ MPO - LC Hardness ◇ Uniboot LC Patch Cord ◇ Pull - tap MPO ◇ Pull - tap LC Patch cord ◇ Polarity Switchable MPO Patch Cord ◇ Polarity Switchable LC Patch Cord ◇ CS/SN series
The structure is 1-12 colored fibers combined with two FRP(or steel wires), which can protect the fiber inside by providing suflcient tensile strength and good resistance to lateral crushing.
Application
· As FTTH Cable, for indoor horizontal and vertical cabing.
· Indoor cabling under carpet and along corner.
· Temperature range -20°C - +70°C
Properties
· Simple and convenient structure, convenient for indoor cabling.
· Good design for lateral crushing resistance.
· Fiber count is 1-12 cores, can be other fiber count upon request.
· White color for indoor use, can also be other color upon request.
· LSZH material for out jacket, can also be other material upon request.
Specifications (Table 1)
Fiber Count | Outer Diameter (mm) ±0.2mm | Nominal Weight | Min.bend Radius(mm) | |
1-12 Cores FTTH Optical Fiber Cable Table 1 | ||||
1 | 3.1*1.9 | 9 | 20H | 10H |
2 | 3.1*1.9 | 9 | 20H | 10H |
Specifications (Table 2)
Fiber Count | Outer Diameter (mm) ±0.2mm | Nominal Weight | Min.bend Radius(mm) | |
1-12 Cores FTTH Optical Fiber Cable Table 2 | ||||
2 | 5.0*2.0 | 20 | 20H | 10H |