Adapters Connector Kits Patch Cords & Pigtails Pre - termination Fanout Cable Field Installable Connector FTTH terminal Boxes & Sockets Rack Mount Patch Panel ODF and Distribution Frame Optical Enclosure
Optical PLC Splitter Optical FBT Coupler CWDM Module 4CH/8CH CWDM Mux/Demux Module DWDM Module Optical Attenuator Optical Isolator Optical Circulator Optical Collimator Optical Reflector/Terminator Optical Loopback
Adapters
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
Patch Cords & Pigtails
◇ SC Series ◇ LC Series ◇ FC Series ◇ ST Series ◇ MU Series ◇ E2000 Series ◇ MPO Series ◇ Others
IDC Internal Connection
◇ MPO Patch Panels & Cassettes ◇ High Density MPO Patch Panel & Cassette ◇ MPO Trunk Cable ◇ MPO - LC Patch Cord ◇ MPO - LC Hardness ◇ Uniboot LC Patch Cord ◇ Pull - tap MPO ◇ Pull - tap LC Patch cord ◇ Polarity Switchable MPO Patch Cord ◇ Polarity Switchable LC Patch Cord ◇ CS/SN series
Widely used in passive optical networks (such as EPON, GPON, BPON, FTTX, FTTH, etc.), and supports multiple users to share a single PON interface.
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. OPTICO full arrange PLC Splitters feature small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity.
Advantages
• Low insertion loss and high return loss
• PDL automatic screening system(Ultra low PDL is available)
• High reliability and stability
• Connector can up to grade B
• 100% 3D tested by Daisi and Sumix
• High-low temperature cycle test
• 100% tested before delivery
• FTTH Cabling solution could be design
Specification
Parameter | 1X5 un-equal mini PLC | |
Operating Wavelength(nm) | 1260~1650 | |
Fiber Type | G657A or as customized | |
Typical Insertion loss(dB) | 1.8/15.7 | |
Return Loss(dB) | ≥50 | |
Directivity(dB) | ≥55 | |
PDL(Max.) | 0.3 | |
Maximum operating power(mW) | 300 | |
Wavelength Dependent Loss(dB) | ≤0.3 | |
TDL(Max.) | 0.5 | |
Operating Temperature(°C) | -40~+85 | |
Storage Temperature(°C) | -40~+70 | |
Dimensions (mm) (L xWxH) | Bare fiber | 55x7x4 |
900um fiber | 55x7x4 | |
ABS Box | 120x80x18 |
Note:
1. Specified without connectors
2. Add an additional 0.2dB loss including connectors
Transmission Drawing(Unit: mm)